10 Tips for Power Washing Siding Your Home

Power washing siding your home is a great way to clean it and restore its original color. It’s also a good way to remove any dirt, mold or mildew that may have built up over time. Power washing can be done by a professional or you can rent a power washer and do it yourself. Not only will power washing your home’s siding make it look better, but it will also help to protect it from the elements. Power washing your home’s siding can be a big job, but it’s worth it to keep your home looking its best.

Here are 10 tips for power washing your home’s siding:

1. Make sure you have the right equipment: You’ll need a power washer that’s powerful enough to clean your home’s siding but not so powerful that it will damage it. This is something you can ask a professional about or read up on before you rent a power washer.
2. Start with a low pressure setting: You can always increase the pressure if you need to, but it’s better to start low and work your way up. This will help to prevent any damage to your home’s siding.
3. Use the right cleaners: There are a variety of cleaners available specifically for power washing. These cleaners will help to remove any dirt, grime or mildew from your home’s siding. You can find them at most hardware stores.
4. Work in sections: Don’t try to power wash your entire home’s siding all at once. Work in small sections so you can focus on getting the area clean. This will also help to prevent any damage. You can start at the top and work your way down or vice versa.
5. Use even strokes: When you’re power washing your home’s siding, use even strokes and move the power washer in a back-and-forth motion. This will help to prevent any streaking or damage.
6. Overlap your strokes: When you’re power washing, be sure to overlap your strokes so you don’t miss any spots. This will help to ensure that your home’s siding is evenly cleaned. You can also use a brush attachment on your power washer to help get into any hard-to-reach areas.
7. Rinse after washing: Once you’ve finished power washing your home’s siding, be sure to rinse it off with clean water. This will help to remove any cleaner residue and prevent streaking. Make sure to rinse from the bottom up so you don’t leave any water spots.
8. Let it dry: After you’ve rinsed your home’s siding, let it dry completely before you apply any sealer or paint. This will help to prevent any streaking or damage. You can use a fan to speed up the drying process.
9. Inspect your work: Once your home’s siding is completely dry, take a look at it to make sure you’re happy with the results. If there are any areas that need more attention, go over them again with your power washer.
10. Apply a sealer or paint:  Once you’re satisfied with the results of your power washing, you can apply a sealer or paint to your home’s siding. This will help to protect it from the elements and keep it looking its best.

These are just a few tips to help you power wash your home’s siding. With a little time and effort, you can have your home’s siding looking like new again. So, don’t hesitate to get started today!